Avaleht / E-pood / Case LIAN LI ATX/micro ATX/Mini-ITX/EATX

← Tagasi toodete juurde

Tootekood: 1424960

Case LIAN LI ATX/micro ATX/Mini-ITX/EATX

Lian Li Lancool III . Form factor: Midi Tower, Type: PC, Product colour: Black, Transparent. Front fans installed: 3x 140 mm, Front fans diameters supported: 12

Tarnija laos: 15

174,67 €

Hinnad sisaldavad käibemaksu.

Kirjeldus

Корпус Lian Li Lancool III RGB Black (G99.LAN3RX.00)

LANCOOL III, the premium mid-tower chassis, offers better thermal performance than LANCOOL II by including 4 pre-installed 140mm PWM fans, and featuring fine mesh panels designed to ensure ample airflow is delivered to the high-end components while the system runs at peak performance.

Comes equipped with 3x 140mm ARGB PWM fans that have similar performance as the LANCOOL III RGB 140mm back PWM Fan.

EXTREME AIRFLOW CRAFTMANSHIP

A fine mesh design has been implemented at the front, top, and both bottom side panels of the LANCOOL III.

HINGED PANELS ALL AROUND

The hinged tempered glass side panels offer an unobstructed view of the interior configuration, while the bottom shroud panels provide quick access to the PSU and storage drives.

The two removable 4mm tempered glass panels located on each side of the case can be opened by pulling the front aluminum handle.

The mesh panels located on both sides of the PSU shroud area can be removed for cleaning when the front panel is unattached.

FLEXIBLE CONFIGURATION

With ample interior room, the LANCOOL III can offer different cooling and usage scenarios

AIR Cooling

With high airflow stock fans, and air tower clearance up to 185mm, the LANCOOL III is ideal for an air-cooling build.

AIO Cooling

With ample front intake, the LANCOOL III can provide strong performance for an AIO cooling build. The top fan bracket can support up to 3 x 120mm/140mm fans and offers enough thickness clearance for an AIO with a 420 radiator/fan combo.

Custom Water Cooling

With the ability to support 3 × 360mm radiators simultaneously, the LANCOOL III can offer custom water-cooling enthusiasts, lots of imagination.

SPACIOUS COOLING SUPPORT

The LANCOOL III is optimized for water-cooling and high-end thermal solutions. A maximum of 10 × 120mm fans or a large 420mm radiator can be mounted in the main chamber.

Multi-way Front Fan/Radiator Bracket

The multi-way front fan bracket offers 4 different ways to mount a radiator or fans to cater to different cooling needs, and features a new latch/handle mechanism to easily secure it in place without the need of the locking thumbscrews.

Removable Top Fan Bracket

The removable top fan bracket with offset fan mounting points allows for a thicker fan and radiator combo to be installed at the top of the LANCOOL III by providing enough clearance from the ram.

Modular PSU Shroud Bracket – Fan/ Pump/ SSD

The adjustable modular PSU shroud bracket can accommodate 1 x 360mm radiator, 3 x 120mm fans, 3 x 2.5” SSDs, or a pump/reservoir combos.

Side Multi-Purpose Mounting Slots

Mounting slots beside the motherboard are provided at 105mm apart (standard 120mm fan mounting points) to allow the installation of a distro plate or a reservoir/pump bracket.

EXTENSIVE STORAGE CAPACITY

Multiple storage drive mounting locations are supported for up to 12 x 2.5” SSDs or 4 x 3.5” HDDs and 8 x 2.5” SSDs.

COMPREHENSIVE CABLE MANAGEMENT

As the second chamber located on the right side is visible, great consideration has been given to cable management. The LANCOOL III features an upgraded solution to ensure neat cable routing with toolless magnetic cable cover doors, and a well-organized layout for hubs and cables.

Sliding Cable Routing Cover

By slightly loosening the two back thumb screws, the cable cover can be adjusted to fit different sizes of motherboards.

REVERSIBLE FRONT I/O

Optimized for PC locate on a desk, the front I/O can be relocated to the bottom of the chassis.

FRIENDLY PSU INSTALLATION

The removable PSU mounting bracket allows for PSU installation outside of the chassis, to then slide it in through from the rear.

ANTI-SAG BRACKET FOR PERFECTLY HORIZONTAL GPU

A GPU anti-sag bracket is included for a seamless display of the hardware through the side tempered glass panels.

• Mid-tower modular chassis for all kinds of configurations

• Equipped with 4 × 140 PWM fans (ARGB or non-RGB)

• Featured airflow optimized mesh structure and hinged side panels

• Supports up to 420 radiator or 3 x 360 radiators and a maximum of 10 fans

• Offers 12 storage drives mounting locations

• Upgraded cable management solution for a clean build

Tehnilised andmed

Emaplaadi vormitegurATX, E-ATX, Micro-ATX, Mini-ITX
TootjaLIAN LI
Tootjakood / MPNG99.LAN3RX.00
EAN4718466011794
Tootja kodulehthttps://lian-li.com/product/lancool-iii/
Category CodeCAS
Unit Box Height0.65
Unit Box Length0.58
Unit Box Width0.32
Disain TüüpPC
Disain Toote kujuMidi Tower
Disain Toote värvLäbipaistev/Must
Disain MaterjalAlumiinium/Karastatud klaas/SGCC
Disain Emaplaadi toetatud kujuteguridATX/EATX/Mikro ATX/Mini-ITX
Disain 3,5" lahtrite arv4
Disain 2,5" salvede arv8
Disain Laienduspesade arv8
Disain AknagaYes
Disain ValgustusYes
Disain Valgustuse värvMulti
Disain Valgustuse asukohtKastventilaator
Disain Tolmuvastane filterYes
Disain JuhtmehaldusYes
Disain LähtestusnuppYes
Disain On/off nuppYes
Disain CPU jahuti maksimaalne kõrgus18.7 cm mm
Disain Graafikakaardi maksimaalne pikkus43.5 cm mm
Disain Toiteploki maksimaalne pikkus22 cm mm
Toide Kaasas toiteplokkNo
Pesad & liidesed AudiosisendYes
Pesad & liidesed AudioväljundYes
Pesad & liidesed USB 3.2 Gen 1 (3.1 Gen 1) A-tüüpi portide hulk2
Pesad & liidesed USB 3.2 Gen 2 (3.1 Gen 2) C-tüüpi portide hulk1
Jahutus Installitud esiventilaatorid3x 140 mm
Jahutus Maksimaalne esiventilaatorite arv3
Jahutus Toetatud esiventilaatorite läbimõõt120/140 mm
Jahutus Installitud tagaventilaatorid1x 140 mm
Jahutus Maksimaalne tagaventilaatorite arv1
Jahutus Toetatud tagaventilaatorite läbimõõt120/140 mm
Jahutus Maksimaalne ülemiste ventilaatorite arv3
Jahutus Toetatud ülemiste ventilaatorite läbimõõt120/140 mm
Jahutus Maksimaalne õhusurve2.3 mmH2O
Jahutus Maksimaalne õhuvool83.5 cfm
Jahutus Ventilaatori kiirus200 - 1800 RPM
Jahutus Eesmised radiaatorid, erinevad suurused saadaval360/420 mm
Jahutus Ülemised radiaatorid, erinevad suurused saadaval360/420 mm
Salvesti Toetatud kõvakettasuurused2.5/3.5 "
Salvesti Kombineeritud HDD/SSD sahtelYes
Salvesti SSD-ketta mõõtmed2.5"
Kaal ja mõõtmed Laius238 mm
Kaal ja mõõtmed Sügavus526 mm
Kaal ja mõõtmed Kõrgus523 mm
Ühiku arvutatud kaal16.9 kg
Toote netokaal10 kg
Ühikud ühes saadetiskastis1
Unit Calculated Volume0.1206 cubm
Shipping Box Weight16.85 kg
Ühiku laius32 cm
Shipping Box Height65 cm
Ühiku sügavus58 cm
Shipping Box Depth58 cm
Ühiku kõrgus65 cm
Shipping Box Width32 cm
NameCASE MIDITOWER ATX W/O PSU/G99.LAN3RX.00 LIAN LI
Model nameLian Li Lancool III RGB Black (G99.LAN3RX.00)
Case product featuresTransparent panel
ModelLANCOOL 3R-X BLACK
Lisainfo / Additional informationBlack/Transparent